Termék kategóriák
Garancia és szerviz
Kosár tartalma
TP-LINK MC111CS WDM Fast Ethernet single-mode 100M médiakonverter
9.500 Ft
Gyártó: TP-Link
Gyári információ: TP-LINK MC111CS WDM Fast Ethernet single-mode 100M médiakonverter
Garancia: 5 év
Automatikus 10/100Mb/s MDI/MDIX Ethernet port.
20 km MM optikai linkhez,full/duplex üzemmódban.
LED információk a hálózat állapotáról!
Tx:1550nm, Rx 1310nm
1 10/100M RJ45 port + 1 single-mode fiber port.
Kompatibilis IEEE 802.3u 10/100Base-TX, 100Base-FX normál
What This Product Does
The MC111CS is a
media converter designed to convert 100BASE-FX fiber to 100Base-TX
copper media or vice versa. Adopting WDM technology, MC111CS takes only
one fiber cable to transmit and receive data, which will save half
cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and
100Base-FX standards, the MC111CS is designed for use with single-mode
fiber cable utilizing the SC-Type connector. The MC111CS supports
longwave (LX) laser specification at a full wire speed forwarding rate.
It works at 1550nm on transferring data and at 1310nm on receiving data.
So the other end device to cooperate with the MC111CS should work at
1310nm on transferring data and at 1550nm on receiving data. Another
TP-LINK´s media converter MC112CS is just one of the examples to
cooperate with MC111CS.
Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Adopts WDM technology, transmitting and receiving data on one single fiber Extend fiber distance up to 20-60km Easy-to-view LED indicators provide status to monitor network activity easily External power supply
Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 100M SC port 1 100M RJ45 port (Auto MDI/MDIX) WDM TX 1550nm RX 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-FX Single-mod Fiber LED Indicators PWR, FDX/Col, Link/Act, SPD Safety & Emission FCC, CE Dimensions (W*D*H) 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Power Supply External Power Adapter
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
A megjelenített leírás tájékoztató jellegű, a megjelenített fénykép illusztráció. A gyártó előzetes bejelentés nélkül változtathat a specifikáción, a terméken, vagy annak csomagolásán. Kérjük, hogy a pontos specifikációért látogasson el a gyártó honlapjára. Az esetleges eltérésekből adódó károkért cégünk nem vállal felelősséget.
